Leather Watch Strap Care– Maintenance Tips for Longevity

Leather Watch Strap Care: Tips to Keep It Looking Great

Caring for Your Leather Watch Strap – Maintenance Tips for Longevity

Handmade leather watch straps are timeless and elegant, but like any natural material, they require proper care to maintain their beauty and strength. Here’s how you can keep your strap looking great for years.

1. Wipe It Down Regularly

After wearing, gently wipe your strap with a soft, dry cloth to remove sweat, dirt, and oils. Avoid soaking it in water as leather is sensitive to moisture.

2. Deep Clean Occasionally

Every few weeks, use a slightly damp cloth with a drop of mild soap to clean the surface. Gently wipe and let it air dry away from sunlight or heat sources.

3. Condition the Leather

Use a quality leather conditioner every 1–2 months to keep your strap soft and crack-free. Apply a small amount with a soft cloth and buff lightly.

4. Store Properly

When not in use, store your watch in a dry, cool place. Avoid sealing it in plastic. A watch box or cotton pouch is ideal for airflow and protection.

5. Rotate Your Straps

If you have multiple straps, rotate them. This helps each one rest and air out, extending its life and keeping them fresh.

With just a little care, your handmade leather watch strap will age beautifully and develop a rich patina that reflects your journey.

clean leather strapcustom leather watch strapfull-grain leather straphow to care leather watch strapleather watch strap caremaintain watch bandstrap cleaning tips
Leave a Reply

TsLeatherGoods
Handmade Leather Products
Login
Register
Login
Don’t have an account?
Register
Registration disabled
Have an account?

What size should I get for my strap?

One of the fears of buying straps online is that you might not know if the strap is of the correct length to suit your wrist. We hope that by the time you are done reading this page, you will know what size you should get. There are two methods that we will run through:

  1. Method 1 – Measure your current strap
  2. Method 2 – Not-So-Quick Math
Size Chart
 

Method 1 – Measure your current strap

This method is the quickest way to know what size to order, but it might not be very precise. What you will need is an existing two-piece strap on your watch. It does not have to be a leather strap.

  1. Measure the length of the long and short piece of the strap. (Example: 105mm on the long strap, and 80mm on the short strap)
  2. Choose the size with the following size chart – the closest to the total length of your existing straps. (The closest size in this example would be M (115mm + 70mm = 185mm)
  3. Note that this is still an approximation, and you should adjust accordingly if your current strap does not fit your wrist perfectly.

Method 2 – Measure your wrist size

If your cannot measure your current strap for some reasons, you would need to measure your wrist size and purchase the strap size according to the guidelines below. If you are between sizes (for e.g. wrist size of 16.7cm), we recommend to size up.

Step 1: Measure your wirst with the rope:

Step 2:Measure the rope length with the ruler:

And then following the size chart below to know your strap length:

Find Your Watch Strap Lug Width

If you’re looking to purchase a strap for your watch, you will need to know the lug width of your watch. Lug width refers to “A” in this schematic below.

There are two ways to find out the lug width of your watch.

  1. Firstly, you can Google “<watch brand and model> lug width” and see if there is an answer from the brand’s website, or some other websites.
  2. Alternatively, you can simply take a ruler and measure the lug width directly on your watch.

Lug widths are typically in whole numbers, and while the most common lug widths are between 18-22mm, they can go down to 8mm or up to 32mm even. Our ready stock straps are available in 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm and 26mm. If you need other lug widths, you can have it custom made.

You will then need to purchase a strap of the same lug width. For example, if your watch has a lug width of 20mm, you will need to purchase strap with a width of 20-16.

Note: Our Widths typically have two numbers, for example 20-16. The first number (20) refers to the lug width (“A” in the schematic above). The second number (16) refers to the buckle width (“B” in the schematic above). You just need to ensure that the first number matches the lug width of your watch.